Api g 1 ELISA 2.0 kit - Single plate

貨號:

EPC-AG1-1

品牌:

Indoor Biotech

規格:

96T

概述

Api g 1 ELISA 2.0 kit - Single plate，另還有產品Api g 1 ELISA 2.0 kit - Five plate，貨號：EPC-AG1-5

詳述

抗體：5D4/7C4

標準范圍：200-0.39 ng/mL

檢出限：01.56 ng/mL

背景：450nmOD<0.08

測定系數：R平方>0.98

內容：

平板：預涂抗Api g 1單克隆抗體5D4

小瓶1：（白頂）Api g 1過敏原標準品

濃度：2000 ng/ml

小瓶2：（棕色）抗Api g 1抗體7C4

小瓶3：（藍頂）鏈霉親和素過氧化物酶

瓶1：洗滌緩沖液（10倍濃縮液）

瓶2：分析緩沖液（10倍濃縮液）

瓶3:TMB顯色液

瓶4：終止溶液（0.5N硫酸）

儲存：ELISA 2.0試劑盒應保存在2-8°C。

有效期：自收到之日起6個月

?

Certificate of Analysis

抗體	免疫原	?	同型	特異性	純化	活性
5D4	Api g 1	?	小鼠IgG1/kappa	Binds to species specific epitope present on Apium gravolens allergen, Api g 1.	?Produced in vitro cell culture and purified by affinity chromatography using Protein A. Single heavy and light chain bands on SDS-PAGE.	?
? 7C4? ? （檢測抗體）	Api g 1	?	小鼠IgG1/kappa	Binds to species specific epitope present on Apium gravolens allergen, Api g 1.	?Produced in vitro cell culture and purified by affinity chromatography using Protein G. Single heavy and light chain bands on SDS-PAGE.	Activity: Titrated for use in ELISA at 1/1000 dilution. Prepared in 1% BSA/50% glycerol/PBS, pH 7.4, 0.22 μm filtered, preservative free

?

過敏原標準品: Purified recombinant Api g 1 allergen 1.0101 prepared in 1% BSA/50% glycerol/PBS, pH 7.4.

濃度: 2,000 ng/mL (based on amino acid analysis)

操作步驟：

1. Prepare a 1x dilution of wash and assay buffers from the 10x concentrates in clean containers using 18.2MΩ de-ionized water or Type I ultrapure water.

For one plate: Wash buffer: add 15mL concentrate to 135mL water (150mL total volume) Assay buffer: add 3mL concentrate to 27mL water (30mL total volume) Adjust volumes accordingly for multi-plate assays.

Diluted buffers may be stored at 4 oC for up to 1 week. The example below is for testing 6 samples starting at 1/10 dilution. A multichannel pipet is recommended for mixing and transferring between wells. ?

Highly concentrated samples will require pre-dilution before adding to the plate.

2. Remove the plate from the foil pouch. Add 150μL wash buffer to each well. Empty the wells by inverting the plate and then tap on absorbent paper to remove residual buffer. Repeat the wash cycle two times.

*Move directly to the next step to prevent the wells from drying.

3. Add 100μL assay buffer to all wells. Add an additional 80μL of assay buffer to wells A1-H1 (the total volume of assay buffer in these wells will be 180μL; all other wells will have 100μL).

4. Standard: gently vortex the standard and add 20μL to wells A1 and B1. Mix by pipetting up and down 8-10 times, and then transfer 100μL into wells A2 and B2.

Mix and continue the doubling dilution scheme across the plate to wells A10 and B10. Remove and discard 100μL from wells A10 and B10 (100μL will remain).

The assay buffer in wells A11, B11 and A12, B12 will serve as Blanks. Samples: add 20μL of sample to wells C1-H1. Mix by pipetting up and down 8-10 times.

Transfer 100μL to wells C2-H2. Continue mixing and transferring to column 12. Remove and discard 100μL from wells C12-H12 (100μL will remain).

When finished preparing the plate, the final volume in all wells should be 100μL.

5. Cover the plate and incubate for 1 hour ± 10 minutes at room temperature (20- 25oC) away from direct sunlight. Note: gentle agitation on a plate shaker during incubations may reduce variability.

6. Gently vortex the biotinylated antibody and prepare a 1:1,000 detection antibody and conjugate mix by adding 11μL biotinylated antibody and 11μL streptavidinperoxidase to 11mL assay buffer in a reagent reservoir.

Mix thoroughly. Wash the plate 3x with 150μL wash buffer per well. Add 100μL of the detection antibody/ conjugate mix to each well.

7. Incubate the plate for 1 hour ± 10 minutes at room temperature (20-25oC) away from direct sunlight.

8. Pour the TMB substrate and stop solution into separate reagent reservoirs so they are ready to use in Step

9. Wash the plate 3x with 150μL wash buffer per well. 9. Use a multi-channel pipette to add 100μL TMB to each well and monitor the reaction as the blue color develops.

Once OD450 reaches 0.08-0.09 for Standard 1, use a multi-channel pipette to add 50μL stop solution to each well (the color will change to yellow).

10. Gently tap the plate to ensure homogeneity and measure the absorbance at 450nm within 30 minutes. The OD for Standard 1 should be between 1.2 and 3.5.

儲存與安全

儲存:

2-8℃

關于我們

Wolcavi Biotech致力于干細胞免疫治療、分子生物學 、免疫學、體外診斷等相關領域的實驗需求產品開發和銷售。主要產品有抗原抗體|無血清培養基|細胞培養耗材并代理銷售Abcam、Invitrogen(Gibco)、Roche、Sigma、R&D、Meridian等二十多家國外知名品牌。

聯系我們

北京市通州區金橋科技園景盛南二街12號納特園區
Phone: +86 010 8646 3560
Email: info@wolcavi.com

新聞

標簽

?
?
?
?
?

?
010-5944 6861

亚洲va在线va天堂va偷拍|99久久久久无码国产精品|一本久久a久久免费精品网站|午夜精品久久久久久毛片777|国产95在线 | 欧美|欧美一区二区三区高清在线|亚欧无码视频一区二区三区

亚洲va在线va天堂va偷拍|99久久久久无码国产精品|一本久久a久久免费精品网站|午夜精品久久久久久毛片777|国产95在线 | 欧美|欧美一区二区三区高清在线|亚欧无码视频一区二区三区

Api g 1 ELISA 2.0 kit - Single plate